"Which is the best RO purifier for borewell water?" is one of the questions we hear most in Puducherry. The honest answer is that no single model is best for every borewell – the right choice depends on what is actually in your water. This guide shows you how to decide.
Step 1: Know your water – TDS, hardness and iron
Borewell water can differ a lot from one street to the next. Before buying anything, get your water checked for three things:
- TDS (total dissolved solids) – the amount of dissolved salts. India's drinking-water standard IS 10500 sets 500 mg/L as the desirable limit and 2,000 mg/L as the maximum permissible limit where no alternative source is available.
- Hardness – calcium and magnesium that cause scale. IS 10500 lists 200 mg/L as the acceptable limit and 600 mg/L as the permissible limit.
- Iron – gives a metallic taste and rusty stains. The acceptable limit is 0.3 mg/L.
Step 2: Match the technology to the water
As a rule of thumb (your actual water test decides):
| Your water | Usually suitable |
|---|---|
| Low TDS, but possible bacteria | UV or UF purifier |
| Moderate TDS (roughly up to 500 mg/L) | RO, or RO + UV/UF with a TDS controller |
| High TDS / salty taste (above about 500 mg/L) | RO purifier with a suitable membrane |
| High TDS plus hardness or iron | Pre-treatment (iron filter or softener) followed by RO |
Step 3: Do not skip pre-treatment
Hardness and iron are the biggest enemies of an RO membrane. A water softener or iron/sediment filter ahead of the purifier protects the membrane, keeps water output steady and reduces breakdowns. For bigger needs, see our commercial RO plants and filtration systems.
Step 4: Choose capacity and think about running cost
- Pick a storage size and purification rate that suits the number of people in your home.
- Ask about the cost and availability of filters, the membrane and the UV lamp – these are your running costs.
- RO purifiers reject some water along with the salts; ask about the recovery rate and how you can reuse reject water for cleaning or plants.
Checklist before you buy
- Get your water's TDS (and ideally hardness and iron) tested.
- Choose RO if TDS is high; UV/UF alone does not reduce dissolved salts.
- Add a softener or iron filter if hardness or iron is high.
- Confirm installation, service and spare-part availability locally.
Get a recommendation for your borewell water
Call or WhatsApp Naneer Pondy at +91 80985 15373 with your area and water details and we will suggest a suitable setup. You can also browse our RO water purifier range or read about domestic RO purifiers in Puducherry.
