Your RO purifier rarely stops working all at once. It gives small warnings first. If you notice any of the signs below, it is time to replace filters or call a technician.

1. The water tastes or smells different

A new metallic, salty or "chlorine" taste usually means pre-filters are exhausted or the RO membrane is no longer rejecting salts properly.

2. Water flow has become slow

Clogged sediment or carbon filters, or a choked membrane, reduce output. If filling a glass takes much longer than before, the filters need attention.

3. The purifier keeps running or makes unusual noise

A pump that runs constantly, buzzes or rattles can point to low inlet pressure, a failing pump or a blocked filter.

4. There is leakage or dripping

Water dripping from connectors, filter housings or the tank is never normal. Loose fittings and worn O-rings are common causes and should be fixed quickly.

5. The service or filter-change indicator is on, or the UV light does not glow

Many purifiers show alerts when it is time to change filters or the UV lamp. Do not reset the alert without replacing the part.

6. The purified water's TDS reading is rising

If you check TDS with a meter, a steady rise in the output reading suggests the membrane is wearing out. Keep in mind TDS shows dissolved salts only – it does not tell you whether water is free from bacteria.

7. It has been too long since the last service

Even if everything seems fine, a purifier that has not been serviced for six months or more is probably overdue. Hard or salty water shortens service intervals.

What to do next

  • Do not keep drinking from a purifier you suspect is not working.
  • Book a service so the technician can inspect all stages and replace worn parts.
  • Consider an AMC so servicing happens on schedule.

Naneer Pondy provides RO service and AMC in Puducherry with genuine spare parts. Call +91 80985 15373 or read what to expect in our RO service guide for Kathirkamam.